Haier Flat Panel Television 15HL25S User Manual

HLH15BB/15HL25S/HLE20BB/20AL25S/HLH19BB/HLH19W  
LCD TV  
USER MANUAL  
Please read this manual carefully  
before using this TV set and keep it  
for future reference.  
 
Safety Instructions  
IMPORTANT SAFETY INSTRUCTIONS  
Read all of the instructions before using this appliance. When using this  
appliance, always exercise basic safety precautions, including the following:  
1)Save these Instructions ---the safety and operating instructions should be  
retained for future reference.  
2)All warning on the appliance and in the operating instructions should be followed.  
3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use only dry cloth for cleaning.  
4)Attachments ---do not use attachments not recommended by the manufacturer  
as they may cause hazards.  
5)Water and moisture -- do not place this product near water, for example, near a  
bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a  
swimming pool.  
6)Accessories ---do not place this unit on an unstable cart, stand, tripod, bracket,  
or table. Use only with a cart, stand, tripod, bracket, or table recommend by the  
manufacture, or sold with the unit.  
7)Ventilation ---Slots and openings in the cabinets and the back or bottom are  
provided for ventilation. These openings must not be blocked. In a built in  
installation such a bookcase or rack do not install product unless proper ventilation  
is provided.  
8)Power Source ---this LCD TV should be operated only from the type of  
power source indicated on the rating label. If you are not sure of the type of power  
supply to your home, consult your appliance dealer or local power company.  
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet. To prevent electric shock, ensure  
the grounding pin on the AC cord power plug is securely connected.  
10)Power cord protection ---Power supply cords should be routed so that they are  
not likely to be walked on or pinched by items placed upon or against them. Pay  
particular attention to cords or plugs, convenience receptacle, and the point where  
they exit from the appliance.  
11)Lighting precaution ---for added protection for this product during a lighting  
storm or when it is left unattended for long period of time, unplug it from the wall  
outlet and disconnect the antenna or cable system. This will prevent damage to the  
product due to lighting and power line surges.  
12)Never push objects of any kind into this product through openings as they may  
touch dangerous voltage point or short out parts that could result in a fire or electric  
shock. Avoid spilling liquid of any kind on the product.  
13)Servicing ---do not attempt to service the product by yourself, as opening or  
removing covers may expose you to dangerous voltage or other hazards. Refer all  
servicing to authorized service personnel.  
14)Unplug this unit from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a. When the power supply cord or plug is damaged or frayed.  
 
Safety Instructions  
b.If liquid has been spilled, or objects have been fallen into the unit.  
c.If the unit has been exposed to rain or water.  
d.If the unit does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions, as  
improper adjustment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore the unit to its normal  
operation.  
e.If the unit has been dropped or damaged in any way.  
f.When the unit exhibits a distinct change in performance; this indicates a need  
for service.  
15)Heat --- The product should be situated away heat source such as radiators, heat  
registers, stoves, or other products (Including amplifiers) that product heat.  
16)Overloading ---Do not overload wall outlets and extension cord as this can result  
in a risk of fire or electric shock.  
SAVE THESE INSTRUCTIONS  
Thank you for using ourHaier product. This easy-to-use manualwill guide youin  
getting the bestuse of yourproduct. Remember torecord the modeland serial  
number. They are onlabel in backof the unit.  
Model number  
serial number  
Date of purchase  
Staple your receiptto your manual. You will need itto obtain warrantyservice.  
 
To users:  
Thank you for purchasing our LCD-TV.  
Before connecting the LCD-TV and turning on the power, please  
read this book carefully. Please keep this book for later use.  
If the unit is disabled by an electrostatic discharge, please turn off  
the power to the unit and turn it back on to reset.  
CONTENT  
Front Panel Controls..................................................................................  
Connection Options...................................................................................  
Remote Control Key Functions...................................................................  
2
3-4  
5
Remote Control  
Installing Batteries..................................................................................  
..................................................................................  
6
6
Connection Instructions.............................................................................  
Grounding..............................................................................................  
External equipment Connections..............................................................  
Antenna Connection.............................................................................  
PC Setup.............................................................................................  
VCR Setup...........................................................................................  
Cable TV Setup....................................................................................  
7
7
7
7
8
9
10  
External AV Source Setup......................................................................  
10  
Basic Operating Instructions.......................................................................  
11  
Turn on the LCD-TV.................................................................................  
11  
Audio Control..........................................................................................  
Mute......................................................................................................  
11  
11  
Select the TV Channel You Want...............................................................  
12  
Picture Mode...........................................................................................  
12  
Program Scan.........................................................................................  
12  
Sleep......................................................................................................  
12  
Menu Operations.......................................................................................  
Picture Menu Options...............................................................................  
Picture Menu Options Continued...............................................................  
Sound Menu Options................................................................................  
Sound Menu Options Continued................................................................  
13  
13  
14  
14  
15  
Function Menu Options.............................................................................  
16  
Function Menu Options Continued.............................................................  
17  
Adjust Menu Options................................................................................  
Tuning Menu Options..............................................................................  
Tuning Menu Options Continued..............................................................  
Parental Menu Options.............................................................................  
Parental Menu Options Continued.............................................................  
17  
18  
19  
19  
20-22  
23  
24  
Troubleshooting Guide...............................................................................  
Specifications...........................................................................................  
Warranty ..................................................................................................  
25  
 
Front Panel Controls  
HLE20BB  
5
2
3
4
1
7
6
HLH15BB  
2
3
4
1
7
65  
1
2
3
4
5
TV/AV MENU VOL- VOL+ CH-  
CH+ POWER  
15HL25S/20AL25S  
HLH19W  
HLH19BB  
6
7
7
6
7
6
Control Panel Function  
1.TV/AV Selects the input signals: PC/COMPONENT/AV/SV/TV  
2. MENU Press to select the main menu  
3. VOL-(V-) Volume down / Left orientation to adjust the item in the OSD  
VOL+ (V+) Volume up / Right orientation to adjust the item/Press to enter  
4. CH- TV channel down / to select the item in the menu  
CH+ TV channel up / to select the item in the menu  
5. Power supply switch  
6. Power indicator  
Illuminates red in standby mode, illuminates green when the display is  
turned on  
7.Remote Sensor  
Receives the signals from the remote control  
 
Connection Options  
HLH15BB/15HL25S/HLE20BB/20AL25S  
(The figure is just for reference, please see actual unit. )  
AV /S-VIDEO/COMPONENT Audio Input  
Connect audio  
DC Power Cord Socket  
This TV operates on DC  
power. The voltage is  
output from an external  
device to these jacks  
Antenna Input  
Connect cable or  
antenna signals to  
the TV, either direc-  
tly or through your  
cable box.  
indicated on the specifications  
page. Never attemptto  
operate the TV on ac power  
Pb  
Y
Pr  
R
L
V
DC IN  
COMPONENT IN  
D-SUB IN  
PC AUDIO IN  
AUDIO IN  
VIDEO  
S-VIDEO  
ANT IN  
PC Audio Input  
DVD/DTV Input  
Connect a component  
device to thesejacks  
Earphone port  
S-Video Input  
Connect S-Video out  
from an S-Video device  
to the jacks.  
Connect the PC output  
connector from a PC to  
the audio input port  
D-SUB Input  
Connect to the VGA  
15PIN analog output  
connector of the PC  
display card for PC  
display purpose  
Video Input  
Connect video  
output from an external  
device to this jack  
 
Connection Options  
HLH19BB/HLH19W  
The figure is just for reference, please see the real.  
And the AC power supply switch is on the back of the set)  
Antenna Input  
Connect cable or  
antenna signals to  
the TV, either direc-  
tly or through your  
cable box.  
Earphone port  
PC Audio Input  
AV/S-VIDEO/  
COMPONENT Audio  
Input  
Connect the audio  
output from the pc  
to the audio input port  
Connect audio output  
from an external device  
to these jacks  
Video Input  
Connect video output  
from an external  
device to this jack  
S-Video Input  
Connect S-Video out  
from an S-Video device  
to the jacks.  
DVD/DTV Input  
Connect a component  
video/audiodevice to  
these jacks  
VGA Input  
Connect to the VGA  
15PIN analog output  
connector of a PC  
display card to use set  
as a PC display  
 
Remote Control Key Functions  
When using the remote control, aim it towards the remote sensor on the TV  
MUTE  
1
2
4
RECALL DISPLAY  
EXIT  
3
5
1
4
2
5
8
0
3
6
6
8
7
MTS/SAP  
9
P.STD  
7
9
MENU  
TV/AV  
10  
11  
CH+  
CH-  
VOL  
-
VOL  
+
12  
13  
15  
14  
CCD  
SLEEP  
SCAN  
Illustration of the keys on the remote control:  
MUTE  
1. MUTE  
2.  
Power supply switch  
Quick TV channel switch(return to the last channel)  
Menu exit  
3. RECALL  
4. EXIT  
Display current input signal information  
5. DISPLAY  
TV channel number select  
6. 0-9  
Select MONO,STEREO, SAPin NTSC system  
7. MTS/SAP  
Select picture mode: PERSONAL/STANDARD/MILD/FRESH  
To display/exit the main menu  
8. P.STD  
9. MENU  
Select PC/COMPONENT/AV/SV/TV  
10. TV/AV  
TV channel up/down or select the item of the menu  
11. CH+/CH-  
12. VOL+  
Volume up / to select the main menu/ to adjust the item/ to  
enter the submenu.  
Volume down / to select the main menu/ to adjust the item  
VOL-  
Closed caption on/off  
Channel scan  
13. CCD  
14. SCAN  
TV sleep button  
15. SLEEP  
 
Remote Control  
Installing Batteries  
1.Slide open the cover of the battery compartment on the back of the remote  
control.  
2.Load two AAA alkaline batteries in the compartment. (plus and minus poles to  
respective mark)  
3.Replace the cover of the battery compartment.  
Precautions  
As strong light may interfere with the  
Make sure that there is no  
obstacle between theremote  
controller and televisionset.  
signals, change yourposition to  
operate the remote control if  
the television cannot be turned  
on or off as expected.  
Make sure that two AAA alkaline  
batteries are loaded. The batteries  
must be of the same type, must be  
inserted properly, and must not be  
rechargeable.  
Keep the remote control  
away from heat sources or  
humid areas toensure  
effective performance of  
the remote.  
 
Connection Instructions  
The connection instructions shown here are for model HLH15BB for reference only.  
May differ with the other models mentioned.  
Grounding  
Ensure that you connect the grounding / earth wire to prevent possible  
electric shock. If grounding methods are not possible, have a qualified  
electrician install a separate circuit breaker. Do not try to ground the  
unit by connectingit to telephone wires, lighteningrods, or gaspipes.  
External Equipment Connections  
Antenna Connection  
- Antenna or Cable Service with a Cable Box Connections  
- For optimum picture quality, adjust antenna direction if needed.  
Multi-family Dwellings/Apartments  
(Connect to wall antenna socket)  
wall antenna  
socket  
Bronze Wire  
RF coaxial wire (75 ohm)  
VHF antenna  
UHF antenna  
Turn clockwise to tighten.  
Bronze Wire  
Be careful not to bend the bronze  
wire when connecting the antenna.  
outdoor  
antenna  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
To improve picture quality in a poor  
signal area, purchase and install a  
signal amplifier.  
If the antenna needs to be split for two  
TV s, install a 2-Way Signal Splitter  
in the connections.  
If the antenna is not installed properly,  
contact your dealer for assistance.  
NOTE: Cables shown are not included with the TV  
 
Connection Instructions  
PC Setup  
You can use your LCD-TV as a monitor for your personal computer using a VGA  
cable (not supplied).  
Connection and use steps:  
1.Read the userguide supplied with  
your computer and ensure that it has  
a VGAconnector;  
2.Make sure that the power of the LCD  
-TV and thePC are off;  
D-SUB IN  
3.Connect a Dtype 15-pin VGAinterface  
cable ( not supplied ) to the VGAvideo  
interface connector on the PC. Then  
connect the other end to the VGA video  
interface connector on the back of the  
LCD-TV.Tighten the screwson the VGA  
connectors once they are firmly  
connected;  
4.Turn on the power ofthe LCD-TV first ,  
and then turn on the power of the PC;  
5.Press the TV/AV button to set the video  
input mode ofthe LCD-TV toPC-RGB;  
6.Check the imageon your TV. There may be noise associatedwith the resolution,  
vertical pattern, contrast or brightness in PCmode. If noise is present, change  
the PC modeto another resolution, change the refreshrate to anotherrate or  
adjust the brightnessand contrast onthe menu untilthe picture isclear. Ifthe  
refresh rate of the PC graphic card can not be changed,change the PC graphic  
card or consult the manufacturer of the PC graphic card.  
 
Connection Instructions  
VCR Setup  
- To avoid picture noise (interference), leave an adequate distance between the  
VCR and TV  
Connection and use steps:  
1.Read the user guide supplied with your AV devices and ensure that it has  
Composite or S-Video connectors;  
2.Make sure that the power of the LCD-TV and the AV device are off;  
Connection Option 1  
Set VCR output switch to 3 or 4 and then  
tune TV to the same channel number.  
Connection Option 2  
1. Connect the audio and video cables from  
the VCR's output jacks to the TV input jacks,  
as shown in the figure.  
V
IN  
When connecting the TV to VCR, match  
the jack colors (Video = yellow,Audio  
Left = white,and Audio Right = red).  
If you connect an S-VIDEO output from  
VCR to the S-VIDEO input, the picture  
2
1
quality is improved; compared to conne-  
.
cting a regular VCR to the Video input.  
2. Insert a video tape into the VCR and press  
PLAY on the VCR. (Refer to the VCR owner  
manual.)  
s
VCR  
3.Turn on the power of the LCD-TV first ;  
and then turn on the power of the AV  
device;  
4.Press the TV/AV button to set the video  
input mode of the LCD-TV to S-VIDEO  
mode or AV mode.  
 
Connection Instructions  
Cable TV Setup  
- After subscribing to a cable TV service from a local provider you can watch cable  
TV programming. The TV cannot display TV programming unless a TV tuner  
device or cableTV converter box is connectedto the TV.  
- For furtherinformation regarding cableTV service, contact your localcable TV  
service provider(s).  
Connection Option 1  
1. Select 3or 4 withchannel switch oncable  
box.  
2. Tunethe TV channel to thesame selected  
output channel oncable box.  
3. Select channelsat the cablebox or with  
V
the cable boxremote control.  
IN  
Connection Option 2  
1. Connect theaudio and videocables from  
the Cable Box'soutput jacks tothe TV  
input jacks, asshown in thefigure.When  
connecting the TV to aCable Box, match  
the jack colors  
(Video = yellow, Audio Left =white, and  
Audio Right= red).  
2. Select theinput source byusing the TV/AV  
button on theremote control.  
3. Select yourdesired channel withthe  
remote control forcable box.  
External AV Source Setup  
How to connect  
Connect the audioand video cablesfrom  
the external equipment'soutput jacks tothe  
TV input jacks, as shown inthe figure.  
When connecting theTV to external equip-  
V
IN  
ment, match thejack colors (Video = yellow,  
Audio Left =white, andAudio Right =red).  
How to use  
1. Select theinput source byusing the TV/AV  
button on theremote control.  
2. Operate thecorresponding external equi-  
pment. Refer toexternal equipment ope-  
rating guide.  
 
Basic Operating Instructions  
Turn on the LCD-TV  
When the POWER  
button is pressed and the LCD-TV  
MUTE  
is turned on, the indicator light on the front of the LCD-TV  
changes from red to green. When the LCD-TV is turned off  
using the power button, the LCD-TV will go into standby  
mode and the indicator light turns red.  
RECALL DISPLAY  
EXIT  
1
4
2
5
8
0
3
6
7
9
P.STD  
MTS/SAP  
MENU  
TV/AV  
Note:  
The display of the input mode  
will disappear in3 seconds.  
PC  
CH+  
CH-  
VOL  
-
VOL  
+
TV  
CCD  
SLEEP  
SCAN  
COMPONENT  
AV  
SV  
Switch Among Different Inputs: TV / PC / COMPONENT / AV / SV  
Each time you press the TV/AV button, TV, PC, COMPONENT, AV, SV,  
will appear on the screen in order.  
Audio Control  
1.Press the VOL+ button to increase the volume. A number will appear  
on screen indicating the volume level.  
2.Press the VOL- button to decrease the volume. A number will appear  
on screen indicating the volume level.  
30  
Mute  
1.Press the MUTE button to mute the sound temporarily. A mute icon  
appears on the screen.  
2.Press the MUTE button or VOL+/VOL- again to restore the sound.  
The mute icon disappears.  
 
Basic Operating Instructions  
Select the TV Channel You Want  
You can use the number keys on the remote control to directly select TV  
channels.  
The LCD-TV can store up to 181 channels , and you can press the keys on the  
remote control or on the panel to make a selection.  
Picture Mode  
Press P.STD button on the remote control for menu display . For desired mode as  
follows:  
PERSONAL STANDARD MILD FRESH  
Program Scan  
Press SCAN button to scan through all the memorized TV channels. The scan  
will pause for about 2 seconds on each channel .  
If you want to stop the function during auto scanning, simply press the SCAN  
button again .  
Sleep  
Press SLEEP button to set the time : SLEEP 240-SLEEP 180-SLEEP 120  
-SLEEP 90-SLEEP 60-SLEEP 45-SLEEP 30-SLEEP 15-SLEEP OFF  
This feature allows you to turn off the television after a pre-selected  
number of minutes  
 
Menu Operations  
* In this manual, the OSD (On Screen Display) may be different from your TV  
because it is just an example to illustrate the TV operation.  
Press TV/AV to select the input source, and the menu for each source is  
different .  
s
1. Press MENU button to display the main menu, and VOL+/VOL-to select the  
main menu .  
2. Press CH+/CH- to scroll through the parameters  
3. Press VOL+/VOL- buttons to make changes to the parameters  
4. Press the EXIT button to exit the menu  
Picture Menu Options  
Picture quality can be adjusted for any input separately .  
The picture qualityon the screencan be adjustedas follows:  
1. Press MENU button and VOL+/VOL- until the followingmenu appears  
on the screen.  
PC/COMPONENT MENU  
PICTURE  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
COLOR TEMP  
COLOR  
30  
30  
2
COOL  
0
No available incomponent  
No available inPC  
30  
TV/AV/SV MENU  
PICTURE  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
COLOR  
50  
50  
2
50  
50  
HUE  
Only available inNTSC system  
Note: Symbols ontop of themenu in thismanual may bedifferent from the actual set  
 
Menu Operations  
Picture Menu Options continued  
2. Press CH+/CH- button to enter the picture menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired picture quality has been achieved .  
Function:  
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it  
will add more light to dark parts of the picture and by decreasing the level ,it will  
add more dark to light parts of the picture.  
CONTRAST : Adjust the contrast of the picture . The contrast becomes higher as  
the number increase.  
SHARPNESS : Adjust the amount of the detail enhancement , the image  
sharpness rises as the number increases (By increasing the level, it will show  
cleaner and clearer images and by decreasing the level, it will make picture  
smoother).  
COLOR : Press VOL+/VOL- to adjust the color  
HUE : Adjust the tone of the picture . Appear and be adjusted only under NTSC  
mode  
COLOR TEMP : Press to select the color temperature from WARM/NEUTRAL/  
COOL .  
Sound Menu Options  
Sound can be adjusted for any input as follows:  
1. Press MENU and VOL+/VOL- button until the following menu appears on  
the screen  
SOUND  
50  
0
30  
70  
VOLUME  
BALANCE  
BASS  
TREBLE  
AUDIO MODE  
AVL  
VOICE  
OFF  
 
Menu Operations  
Sound Menu Options continued  
You can adjust sound options to the levels you prefer.  
2. Press CH+/CH- button to enterthe audio menuand to goup and downto  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option toyour preference .  
4. Repeat step2 and step3 until desiredsound quality hasbeen achieved ..  
Function :  
VOLUME :Adjust the volumeof your TV  
BALANCE : Adjust the balanceof the audiooutput from leftto right . When  
indication value of balance increases toward +50 , sound of the left speaker  
becomes weaker . When indication value of balance decreases toward -50 ,  
sound of the right speaker become weaker .  
BASS : Adjust the bass of the sound . Can only be adjust under PERSONAL mode .  
TREBLE : Adjust thetreble of thesound . Canonly be adjustunder PERSONAL  
mode .  
AUDIO MODE : Press VOL+/VOL- to select amongPERSONAL, VOICE, MUSIC  
and THEATRE .  
AVL: Automatic Volume Limit Control reduces the effect of high volumes by  
the limiting the same volume to all channels .  
 
Menu Operations  
Function Menu Options  
Menu Language Selection:  
The menus can be shown on the screen in the selected language. First select  
your language.  
1. Press MENU button and VOL+/VOL- until the following menu appears  
on the screen.  
FUNCTION  
INPUT SOURCE  
LANGUAGE  
CC MODE  
TV  
ENGLISH  
OFF  
BLUE SCREEN  
RESET  
ON  
2. Press CH+/CH- button to enterthe function menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired settings have been achieved .  
Functions:  
1. INPUT SOURCE : Display current mode . There are PC, COMPONENT ,  
AV , SV ,TV to display .  
2. LANGUAGE : Press VOL+/VOL- to select the OSD language.  
3. CC MODE :Press VOL+/VOL-buttons to select the Closed Caption options.  
Closed Captioning helps the hearing impaired with the broadcast program,  
as well as helping children learn how to read. A built in decoder displays the  
audio portion of a program as text on the screen when this option is selected.  
OFF: When OFF is displayed on TV, it means CC MODE is turned off.  
CC1: When CC1is displayed on TV means CC MODE is turned on.  
CC2 to CC4: For other modes of video related broadcast information.  
TT1: For program guide and other information displayed by broadcasters.  
(This blocks a large portion of the picture on your screen).  
TT2 to TT4 :For other modes of information displayed by broadcasters.  
(This blocks a large portion of the picture on your screen).  
IMPORTANT: Closed captioning availability entirely depends on broadcasters  
supplying the signal. Therefore, closed captioning might not always be  
available and language availability will differ by broadcast.  
 
Menu Operations  
Function Menu Options Continued  
Note: Select CC1 for full translation of the primary language such as English in  
your area. Select CC2 for secondary language translation such as French or  
any other language that may be broadcast in your area.  
4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set On, the screen  
will be in blue screen after 3 seconds if there is no signal.  
5. RESET : Press VOL+ to reset some settings to the factory default .  
Adjust Menu Options  
1. Press MENU and VOL+/VOL- button until the following menu appears on the  
screen  
ADJUST  
AUTO CONFIG  
PHASE  
CLOCK  
H POSITION  
V POSITION  
0
50  
50  
50  
Note: This menu is only appears in PC mode .  
2. Press CH+/CH- button to enter the adjust menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired quality has been achieved ..  
Functions:  
AUTO CONFIG : Is opted for adjustment of picture location frequency and phase  
parameters .  
PHASE : Removes any horizontal distortion and clears or sharpness the displayed  
characters .  
CLOCK : Adjust the TFT-LCD to match the PC input source  
H-POSITION : Picture horizontal position adjust  
V-POSITION : Picture vertical position adjust .  
 
Menu Operations  
Tuning Menu Options  
1. Press MENU and VOL+/VOL- button until the following menu appears on the  
screen  
TUNING  
CHANNEL  
SKIP  
AFC  
1
OFF  
ON  
FINE TUNE  
ANTENNA  
AUTO PROGRAM  
CATV  
Note: This menuis only appearsin TV mode.  
2. Press CH+/CH- button to enterthe turning menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4.Repeat step 2 and step 3 until desired settings have been achieved .  
Functions:  
1. CHANNEL : Press VOL+/VOL-togo up and down to setthe channel position.  
The display will show the current playing channel.  
Channel Coverage by Antenna:  
Antenna Type  
VHF  
UHF  
Channel Range  
2-13  
14-69  
CATV  
1-125  
2.SKIP : If you want skip a channel , press VOL+/VOL- to select ON , and this  
channel will be skipped next time when you press CH+/CH- . You can press  
the digit buttons to select the channel . If you want to restore the channel , select  
OFF.  
3. AFC : Auto frequency control. Select ON toimprove the image quality .  
 
Menu Operations  
Tuning Menu Options Continued  
4. FINE TUNE : If the image and / or sound received is not very good , you can  
press CH+/CH- to select FINE TUNE in the menu. Then , press VOL+/VOL-  
button to adjust and improvethe image quality. Do not use thisfeature unless  
reception is poor.  
5. ANTENNA: Press VOL+/VOL- button to selectAIR (VHFand UHF) andCATV  
reception preference.  
6. AUTO PROGRAM : Auto search and save the channel .Press the VOL+ button  
to start automatic search functionoperation. Allchannels now available  
will be automaticallypreset in order.After the search has finished,  
the first program number willdisplay on thescreen. This search automatically  
adds only theactive channels inyour area tothe TV's memory. It deletes any  
channels on which there is no broadcast or a poor signal.  
Note: The AUTO PROGRAM function willscan the channelson the selected  
antenna input. If the TV is connected to cable, please select CATV under  
' ANTENNA ' sub menu.  
Parental Menu Options  
1. Press the MENU and VOL+/VOL- button until thefollowing menu appears  
on the screen .  
2. Press CH+/CH- button to select PASSWORD .  
PARENTAL  
PASSWORD  
----  
3. Then input the password0000. It will bring parental menu display on the  
screen. You will see the ollowing menu on your screen:  
PARENTAL  
CHILD LOCK  
MPAA  
PG RATING  
PG CONTENTS  
CAN. ENGLISH  
CAN. FRENCH  
CHANGE PASSWORD  
OFF  
PG  
TV-14  
--DV--  
C8+  
8+  
 
Menu Operations  
Parental Menu Options Continued  
This function enablesyou to blockcertain TV channels in accordanceto the  
requirements established by the FCC.  
2. Press CH+/CH- button to enterthe PARENTALmenu and togo up anddown to  
select the desired option .  
3.Press VOL+/VOL- button to gointo PG RATING and MPAA  
Press VOL+/VOL- button to setthe CHILD LOCKON and PARENTALLOCK OFF.  
4. Repeat step 2 and step 3 until desired quality has been achieved .  
CHILD LOCK:Child Lock off means the lock function is turned off . If the  
Child Lock is in"off" mode then function willnot be activeto accept the  
broadcast signal.Child Lock on means the lock function is turned on. If the  
lock is inthe "on" modethen function isactivated to acceptthe broadcast signal.  
MPAA: When MPAA ratingis selected, youcould select OFF/G/PG/PG-13  
R/NC17/X .  
PG RATING:Select the TV Rating option. You could selectfrom OFF/TV-Y/TV-Y7/  
TV-G/TV-PG/TV-14/TV-MA.  
PG CONTENTS: Pressto set thegrade of theprogram . Whenthere is this  
grade of program , this program will not be display .  
CAN. ENGLISH: Selectthis option. You could select fromOFF/E/C/C8+/G/PG/  
14+/18+ .  
CAN. FRENCH: Selectthis option. You could select fromOFF/E/G/8+/13+/16+/  
18+ .  
CHANGE PASSWORD: The "Default Password" presetby the manufactureris  
"0000" . If you want to change the presetpassword to yourown password, just  
choose any four digits that can be easily remembered and set. Once you set  
password for a particular channel, that channel will be blocked.  
 
Menu Operations  
Parental Menu Options Continued  
PARENTAL LOCK TECHNOLOGY:  
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV  
PROGRAMS Guide ratings to block certain types of TV programs and movies.  
To clearly understand TV program rating codes, read the following information:  
U.S. TV Program Ratings  
NR: Not Rated-this means that programs are not rated or rating does not apply.  
TV-Y: For all children - these types of rated programs are designed for a very young  
audience, including children from ages 2-6.  
TV-Y7: Directed towards older children - this type of rated programs may include  
comedic violence of mild physical, or may frighten children under the age of 7.  
TV-G: General audience - these types of rated programs contains little or no  
violence, no strong language, and little or no sexual dialogue and situations.  
TV-PG:Parental Guidance Suggested-this type of rated programs may contain  
limited violence, some suggestive sexual dialogue and situations, and rare  
language.  
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual  
content, strong language and more intense violence.  
TV-MA:Mature audience only these types of rated programs may contain sexual  
violence, explicit sexual content and profane language.  
FV: This type of rated programs contain Fantasy and cartoon violence.  
Violence: This type of rated programs contain violence.  
S:  
L:  
D:  
This type of rated programs contain sex.  
This type of rated programs contain offensive language.  
This type of rated programs contain dialogue with sexual content.  
 
Menu Operations  
Parental Menu Options Continued  
To understand clearly about movie rating codes, read the following list:  
U.S. Movie Rating Chart  
NR: This means movie is not rated yet. It is pending government rating approval.  
G:  
General Audience-this type of movie rating means all ages admitted to see  
the movie.  
PG-13:Parents Strongly Cautioned - this type of movie rating means some material  
may not be appropriate for children under13.  
R:  
Restricted- This type of movie rating means children under 17 of age require  
to be with parent or guardian.  
NC-17:This type of movie rating means no one 17 and under admitted.  
X: This type of movie rating means adults only.  
To clearly understand Canadian program rating codes, read the  
following list:  
Canadian English Rating Chart  
E: These types of programs are exempt from the rating system. Exempt  
programming includes: news, sports, documentaries, talk shows, music  
videos, and variety of other programs.  
C: This type of programming is intended for children under age 8. There is no  
offensive language, nudity or sexual content.  
C8+:These types of rated programs are generally considered acceptable for children  
8 years and over. There is no profanity, nudity or sexual content.  
G: These types of rated programs are generally suitable for all audiences.  
PG: Parental Guidance Suggested -in these types of rated programs, some material  
may not be suitable for children.  
14+: In these types of rated programs, some content may not be suitable for viewers  
under the age of 14.Parents are strongly cautioned not to have their children  
view 14+ rated programs by pre-teens and early teens.  
18+: Adults Only-these types of rated programs are only for adult viewers only.  
 
Troubleshooting Guide  
To assist in location possible faults use help guide below.  
Troubleshooting  
Verify ifthe television isproperly plugged in.  
Verify ifthe television isproperly supplied withpower.  
Verify thatelectricity is available.  
No picture, no sound  
Verify if correct signals are input.  
Press TV/AV button to change signal input to TV input.  
Restart the television of power supply is interrupted.  
Blank screen  
Press MUTE buttonand verify ifMute mode ison.  
Switch to anotherchannel and verifyif the sameproblem  
happens.  
No sound  
Press VOL+ buttonto see ifthe problem canbe solved.  
Verify ifsound system isfunctional. Refer tochapter on  
adjusting.  
Poor sound  
Verify ifcorrect channel isselected.  
Adjust the antenna.  
Make adjustments byFINE TUNE  
No picture in some  
channel  
Verify if the same problem exists in other channels.  
Check picture and sound systems.  
Refer to relative instructions in the Manual for color  
adjust.  
No color for some channel  
program (black and white)  
Verify ifthe antenna iscorrectly connected.  
Verify ifthe antenna isin good condition.  
Make fine adjustmentof channel.  
Spots with some or  
all pictures  
Disconnect the televisionfrom power supplyand, 10  
seconds later, reconnect to thepower supply.  
If the problemstill exists, contactan authorized  
service depot fortechnical assistance.  
Abnormal functioning  
Note:  
1.If the fault can not be repaired using the above guide consult with your local authorized  
service center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to  
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be  
fatal or causefire.  
 
Specifications  
Model  
HLH15BB/15HL25S  
NTSC-M  
HLE20BB/20AL25S  
Picture, sound  
system  
Audio output  
1.5W+1.5W  
AV input PC input S-VIDEO input PC audio input  
Headphone output YPbPr input Antenna input DC input  
External input port  
Input: 110V~ 60Hz,  
48W  
Output:  
AC-DC adapter  
--- 12V  
60W  
Power consumption  
Working:5 C~35 C  
Storage:-10 C~45 C  
Temperature  
Accessories  
Remote control  
Batteries  
User manual  
AC-DC adapter  
Model  
HLH19BB/HLH19W  
NTSC-M  
Picture, sound  
system  
Audio output  
1.5W+1.5W  
AV input PC input S-VIDEO input PC audio input  
Headphone output YPbPr input Antenna input  
External input port  
120V~ 60Hz  
60W  
Power requirements  
Power consumption  
Working:5 C~35 C  
Storage:-10 C~45 C  
Temperature  
Accessories  
Remote control  
Batteries  
User manual  
NOTE  
Design and specifications are subject to change without notice.  
Dimensions quoted in this manual are approximate.  
 
Warranty  
Warranty  
90 days labor  
and one year parts .  
 
V0.3  
0090508051A  
 

Graco Water Pump 256200 User Manual
Grandstream Networks Telephone GXP1450 User Manual
Grizzly Impact Driver H0581 User Manual
Haier Clothes Dryer T60 32 User Manual
Hasbro Games 06717 User Manual
Heath Zenith Universal Remote 598 1135 08 User Manual
HP Hewlett Packard Portable Generator 8082A User Manual
HP Hewlett Packard Scanner 3300C User Manual
Hunter Fan Fan 23782 User Manual
IBM Fan 92P1477 User Manual