Parts
INSTRUCTIONS–PARTS LIST
308983
Rev. B
See instruction manual 308981 for
important warnings and information.
READ AND KEEP FOR REFERENCE.
First choice when
quality counts.
t
INSTRUCTIONS
For converting METAL Husky 715 air-operated diaphragm pumps
Huskyt 716 Air Motor Retrofit Kits
Part No. 241631
with standard air motor
Part No. 241664
with remote-operated air motor
9090A
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
ECOPYRIGHT 1999, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
Parts
Husky 716 Air Motor Retrofit Kit
Part No. 241631, with standard air motor
Part No. 241664, with remote-operated air motor
Ref.
No. Part No. Description
Qty
Grounding Strip
1
240224
MOTOR, air, standard
1
Included in Kit 241631
See manual 308981 for parts.
1
241255
MOTOR, air, remote-operated
Included in Kit 241664
1
See manual 308981 for parts.
2
3
194246
114882
290045
111183
110636
110004
104893
111920
113500
108808
COVER, air
2
12
1
SCREW, torx
4
PLATE, designation
RIVET, for designation plate (4)
O-RING
5
2
vee clamp nut
6
8
2
7
PACKING, o-ring
2
7
PACKING, o-ring
2
NOTE: Parts shown with solid lines
in the drawing below are included in
the Air Motor Retrofit Kit.
8
LUBRICANT, grease (not shown)
ADHESIVE, anaerobic (not shown)
1
9
1
10
PACKING, u-cup (not shown)
2
For diaphragm shaft
1
4
2
manifold bolt
10
outlet manifold
2
2
muffler
1
7
6
3
diaphragm shaft
5
air-side diaphragm plate
4
diaphragm
For older models using 186265 fluid-side
1
diaphragem plates, use 104893 o-ring. For newer
models using 191837 fluid-side diaphragm plates,
use 110004 o-ring.
fluidĆside
diaphragm plate
vee
clamp
2
3
4
Torque to 80 to 90 in-lb (9 to 10 N-m).
Apply grease (8).
6
diaphragm shaft
screw
6
The words “AIR SIDE” on diaphragm must face
toward diaphragm shaft.
fluid cover
Flat side of air-side diaphragm plate must face
toward diaphragm shaft.
5
6
inlet
manifold
Apply medium-strength (blue) Loctite
R
(9) or
equivalent to threads, and torque to 80 to 90 in-lb
(9 to 10 N-m) at 100 rpm maximum.
9090A
2
manifold bolt
308983
3
Graco Standard Warranty
Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the
date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited
warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment
determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accor-
dance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or sub-
stitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the
date of sale.
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection
with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured
by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide
purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnais-
sent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires
exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
Graco Phone Number
TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor closest to you:
1–800–367–4023 Toll Free
Loctiter is a registered trademark of the Loctite Corporation.
All written and visual data contained in this document reflect the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Sales Offices: Minneapolis, Detroit
Foreign Offices: Belgium, Korea, Hong Kong, Japan
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
PRINTED IN USA 308983 May 1999. Revised February 2000
4
308983
|